Art No: A200H-D - Hood Mounted Extraction Unit with Flexi-Duct (wxhxd 680x525x450)
|Model No:||Fan Motor Spec||Air Volume@ Free Air||Ave. Air Velocity @ Filter Face||Ave. Velocity @ Hood Face||Noise Level LAeq dB(A)|
|A200H-D||230V 50Hz 105W||355 m3/hr || 0.6 m/sec ||0.25 m/sec|| 58dB(A) |
* 110 Volts 50 or 60Hz available if required.
Air extraction hood and spray booth
Captures, filters and expels for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling and more….
Applications include filtration of:
Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A2 size. A2 drawing boards can be placed into the hoods at an angle for efficient overspray capture.
The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
All Graphic Air filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
A200H-D - Extraction cabinets (All odours and gases are extracted to atmosphere)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GraphicAir Extraction Cabinets
Model No’s A200H-D
NOTE: This unit exhausts air via flexi-duct to atmosphere.
Steel construction finished in dove grey – fan/filter unit mounted onto hood enclosure - particulate filter – centrifugal blower (A100H-D has 2 blowers) external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter. Flexi-duct(s) 2 metres x 100mm dia. (A100H-D has 2 ducts).
Operation All Graphic Air filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
For artwork applications, standard A2 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-duct(s) can be fixed to a standard domestic vent(s) or simply placed through a partially open window to facilitate portability or convenience.
The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.
These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection
whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours,
gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct(s).
Also see TechFlo filtration and extraction cabinets for higher specification equipment.
Please contact us for advice on the choice of machine for any given situation.
Choose a currency below to display product prices in the selected currency.