GraphicAir A200H Hood Mounted Air Filtration Cabinet

Art No: A200H - Hood Mounted Filtration Cabinet (hxwxd 600x680x450)

Filtration Hood and Spray Booth

Capture, contain and filter for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling.

Applications include filtration of:

Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.
The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



GraphicAir Filtration Cabinets

NOTE: These units are recirculatory; i.e. filtered air is exhausted back into the workplace.

Description

Steel construction finished in dove grey – fan/filter unit mounted onto hood enclosure - particulate filter
– carbon impregnated fibre filter – axial fan(s), external rotor motor type brushless, UL, VDE and CSA approved (A100H has two fans) - sealed electrical wiring and switch, downstream of filters.
Operation All Graphic Air filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
For artwork applications, standard A1 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture.
3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning,
sanding etc.

Filtration
The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for
long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours.

Through the process of filtration, adsorption and dilution, operator exposure to concentrations of potentially hazardous substances is vastly reduced.
Specification

 * 110 Volts 50 or 60Hz available if required.
These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator
protection from concentrations of airborne contaminants. They are not recommended for continual usage, i.e.
production applications, particularly in confined and/or badly ventilated areas.
See GraphicAir extraction cabinets A200H-D and A100H-D for total solvent odour and gas extraction, or TechFlo
filtration cabinets for higher specification filtration

Please contact us for advice on the choice of machine for any given situation.