GraphicAir A300S-D Air Extraction Cabinets (wxhxd 565x390x430)

Art No: A300S-D - GraphicAir A300S-D Air Extraction Cabinets

Dimensions wxhxd 565x390x430

Extraction Unit for Aerosols, Airbrushes and more

Printable PDF Specs
Contains, filters and extracts for a cleaner, healthier working environment for the hobbyist, modeler and arts and craft enthusiast.

Applications include filtration and removal of:

Aerosol paints, lacquers, adhesives (glue booth for Spray Mount) and airbrush overspray. Solder fume, general solvent vapours and gases extracted to atmosphere. Filtration of grinding dusts, general particulates and powders etc.

Extraction unit

(All odours and gases and extracted to atmosphere)

Description

Steel construction finished in dove grey - plastic replaceable spray/fume shield - particulate filter - centrifuga blower, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia. - carry handle.

Operation

All WS filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This unit can be used in two positions.

Horizontal position - for Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.
Vertical position - For model sprays and airbrush use - light grinding particles (not sparking) - solder fume extraction and general solvent and gas extraction.

Filtration

The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposure to potentially hazardous substances.

Specification

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.