Iwata Custom Micron SB Airbrush

Art No: IW-CM-SB - Iwata Custom Micron SB Airbrush

The CM-SB has a 0.18mm needle and nozzle. The CM-SB is the most versatile in the Custom Micron range because you can attach small side cups that hold a few drops of paint through to suction bottles up to 2oz (56ml). This is ideal when frequent colour changes are required. Also you may view your close-up detail work directly over the top of your airbrush without a gravity bowl in way of the view. Click here to view cups and bottles to fit the CM-SB.

The CM-SB is excellent for these applications:

• Illustration
• Fine Art
• Nail Art
• Photo Retouching
• Figurines/Miniatures

The CM-SB features:

• 0.18mm nozzle for the finest detail
• Hand-fitted and tested matched head system
• Side-feed (comes with 1/8oz (3.5ml) cup for right or left-handed use)
• Dual-action
• Internal-mix
• Ultra fine detail to 3/4" (0.18mm to 20mm) spray pattern
• Removable head assembly for easy cleaning
• Easy roll top trigger
• Body cut-out for easy adjustment of needle packing and lubrication
• Pre-set adjustment handle
• Crown cap
• Highly polished, hardened stainless-steel needle for exceptionally smooth transition from detail to mid-range spraying

The CM-SB has the option to change to a 0.23mm head system for greater coverage and medium paints. To retain the ultimate performance of your Custom Micron, Iwata recommend that you fit a complete matched head system or, if you require a replacement nozzle only, that you send your airbrush in for a technical expert to fit a replacement nozzle (See service/repair).

With a fine nozzle like the 0.18mm nozzle of the CM-SB, be careful to use paints with fine pigment and suitably thinned, as heavier pigments and higher viscosity paints can cause blockages. As a guide, thin paints to a milky consistency. If you have a query whether a particular paint is suitable for a particular airbrush, please contact us.

These paints are specially formulated to be ready to go through a fine airbrush:

• Medea Nail Art colours
• Com Art water based acrylics

You will also need:

• Air source (look at recommended Iwata Studio Series compressors)
• Air hose (look at Iwata Hoses)
• Cups and bottles as required (look at optional parts list)

Free Medea Superlube (2cc) with every Iwata airbrush or spray gun.