Iwata Studio Series Smart Jet Plus Handle-Tank compressor

Art No: C-IW-SMART-HT - Iwata Studio Series Smart Jet Plus Handle-Tank compressor

Iwata Studio Series compressors are powerful, compact and quiet. With oil-less piston motors, they are low maintenance and affordably priced. The Iwata Studio Series are the perfect companion to any of the Iwata airbrushes.

The Smart Jet Plus Handle Tank compressor, like its name suggests, has the additional feature of a 450cc tank inside the handle. It is also more powerful, with almost twice the airflow of a Smart Jet Pro, so the Smart Jet Plus Handle Tank can run up to two Iwata airbrushes or similar airbrushes at the same time.

The Smart Jet Plus Handle-Tank features:

Low maintenance, oil-less single piston air compressor
Quiet running 1/6 HP induction motor
450 cc air tank inside the handle
Air flow at 0 psi: 0.81 CFM (23 lpm)
Working pressure from 0 psi to 60 psi.
Smart Technology automatic switching reduces running time and motor wear (40 psi on / 60 psi off)
Moisture filter
Pressure gauge
Air regulator for precise air pressure adjustment
Comes with a 3 metre (10') braided hose
One 1/4 BSP outlet
Built in airbrush holder
On/off switch
Size: 28 x 16.5 x 29 cm
Weight: 5.5 kg
Voltage: 220-240V 50Hz
Noise level: 54 decibels
Duty cycle: 40 minutes use. Please allow the motor to rest for at least 20 minutes after each cycle of use.

The Smart Jet Plus Handle-Tank is suitable for running two of the following or other similar fine airbrushes concurrently:
Iwata Revolution
Iwata Eclipse (except G6)
Iwata HP (except BC2)
Iwata HP-Plus
Iwata Hi-Line
Iwata Custom Micron
Iwata Kustom series
Paasche CC
Paasche F
Paasche Talon
Paasche V
Paasche VJR
Paasche VSR90
Paasche VV
Badger 100
Badger 150 (except with HD head)
Premi Air G35

The Smart Jet Plus Handle-Tank is suitable for running one of the following airbrushes, small spray guns or similar:
Iwata HP-BC2
Iwata Eclipse G6 (not fan pattern)
Iwata RG-3 (up to 0.6mm nozzle, not fan pattern and at low pressure for tanning only)
Iwata LPH-50 (up to 0.6mm nozzle, not fan pattern and at low pressure for tanning only)
Paasche H
Paasche HS
Paasche VL
Paasche VLS
Paasche MIL-SET
Paasche AEC
Paasche 200T (at low pressure for tanning)
Badger 150 HD
Badger 155
Badger 175
Badger 200
Badger 250
Badger 260
Badger 350
Asturo C3, C5
Rio tanning airbrush

If you require further advice on choosing the most suitable eqiupment for you needs and budget, or if you have any doubt about the compatability between equipment you are buying and equipment you already own, then please contact us.