TechFlo T660H-C - Hood Mounted Filtration Cabinet (wxhxd 680x525x450)

Art No: T660H-C - TechFlo T660H-C - Hood Mounted Filtration Cabinet (wxhxd 680x525x450)

Fume Filtration Hoods and Cabinets

Capture, contain and filter for a cleaner, healthier working environment within electronic design and rework, dental/medical labs, pharmaceutical labs, design and technology, science in education and more . . .

For use in a multitude of situations where external venting is impractical but where contaminant capture and filtration is necessary.

Applications include the filtration of fumes, vapour and particulates emanating from:

spray adhesives, conformal coatings and paints, monomers, hazardous powders and particulates, resins, sealants, solders, light grinding particles, organic solvents and cleaners etc.

Description

Steel construction finished in dove grey - fan/filter unit mounted onto hood enclosure complete with clear polycarbonate panel and hood lighting - particulate (intake) filter - bonded carbon filter - centrifugal blower(s) (T930 has 2 Blowers), external rotor motor type brushless, UL, VDE and CSA approved - sealed electricals, downstream of filters.
Note: T930H-C has a dual airspeed function to facilitate higher vapour adsorption.

Operation

All WS filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

Handling and / or use of potentially harmful substances is carried out within the hood enclosure in front of the intake filter area. Cleaned air is vented to the top rear of the units.
For artwork applications, standard A2 (T660H-C) or A1 (T930H-C) drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture.

A Dimensions = T660H-C, Weight 38KGS

Filtration

The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. (Optional HEPA filters available to 0.3micron particles). This is followed by a high grade bonded carbon filter (3.5kg T660H-C and 7kg T930H-C).
Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced or eliminated.

Specification

These units are designed for immediate operator protection from concentrations of airborne contaminants whereby all gases, fumes, vapours and particulates within the hood enclosure are filtered and cleaned air is exhausted to the top rear of the cabinet. See TechFlo extraction cabinets No's T660H-D and T930H-D

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.