Force 8 A1P2 Dust Filter Cartridge (Pack of 2)

Description

Art No: FM-F8-112 – Force 8 F8 112 Twin A1P2 Filter Cartridge

These are A1P2 replacement filters to fit the Force 8 Half-Mask with Typhoon Valve.

A1P2 filters are suitable for protecting your respiratory system from:

• Solvent-based painting
• Water-based painting
• Rubbing down paint
• Paint stripping
• White spirit
• Welding (ferrous and lead)
• Organic vapours and gases
• Dusts
• Mists
• Fibres and fibre glass
• Plaster
• Wood (hard and soft)
• Nuisance odours

Conformity:

These filters confirm to EN140 (Face piece), EN14387:2004 (Filter performance), EN143:200 (Filter performance).

PLEASE NOTE:

When fitting filters to your mask, you will need to use a reasonable amount of force to rotate them into the “locked” position. This is to ensure that the gasket between the filters and the mask body is well compressed and therefore sealing the interface efficiently. When carrying out this task, be careful not to grip the exhaust valve body inside the mask. However, you may grab the overall mask body with the required force to rotate the filters into the “locked” position.

Replace the filters periodically. If you start to smell the odour of the paint or it becomes difficult to draw air through the filter, then it is time to replace your cartridges. Preferably replace them periodically before this occurs to ensure you are fully protected.

Additional information