6005 AutoBorne Sealer Orange – 240ml

6005 AutoBorne Sealer Orange – 240ml


£16.39 exc vat

Please allow up to 10 working days for your order to leave our warehouse
(excluding weekends and bank holidays.)

Get Pre-Approved
Fast check - won't affect your credit rating.
SKU: CTX-6005-08
Brands: Createx


Art No: CTX-6005-08 – 6005 AutoBorne Sealer Orange – 240ml

AutoBorne Sealers are a professional, waterborne DTS (Direct To Substrate) primer for application direct to aluminium, wood and most plastics. It is not a direct-to-metal (DTM) primer. When working on bare metal, first apply a self etching DTM primer.

AutoBorne Sealers are waterborne sealers designed for use with waterborne and solvent borne base coat paints. The sealers should be colour-keyed with the base coat or mid‐coat colour to be applied for improved coverage. AutoBorne Sealers are easy to apply, dry quick, self‐level and may be dry‐sanded. As part of a complete custom system topcoat with Auto-Air Colors or Wicked Colors for a seamless colour system as well as any other type of waterborne or solvent‐based paint.

AutoBorne Sealers features:

  • Compatible for use with any paint type including urethane, water-based and waterborne.
  • Universally compatible with all automotive primers.
  • VOC compliant in the United States, Canada and Europe.
  • Available in a full line of colours for colour–keyed mid-coat application
  • May be used as base coat and top-coated direct
  • Excellent durability and tenacious adhesion for long lasting paint jobs
  • Resists cracking and prevents bleed through FROM underlying fillers
  • Excellent self-levelling
  • Quick to Dry
  • Easy to Sand
  • Does not require sanding prior to application of mid-coat paint and top-coat clear


Preparation of Substrates:

  • Harder plastics such as polystyrene may require application of an adhesion promoter prior to application of sealer.
  • Metal (except aluminium) requires a self-etching DTM primer before application of AutoBorne sealer.
  • Wash all surfaces to be painted with wax and grease remover.
  • If sanding is required, prepare surface with 600 – 800 grade sandpaper.
  • If surface is sanded, wash off all residues with wax and grease remover.

Equipment set-up:

  • Spray gun fluid tip 1.3 – 1.4mm
  • Touch-up gun fluid tip size 0.8 – 1.2mm
  • Approx. 19 – 28 psi inlet, adjust gun for wetted coats which are not over-atomized

Not recommended for use with an airbrush


  • Reduce 9:1 with 4012 High Performance Reducer (approx. 10% per volume)
  • Allow reduced mixture to set 10 minutes or more prior to spraying
  • Reduction allows for a smoother finish and improved coating integrity.
  • 2 – 3 coats for complete coverage
  • Re-coat (between coats) approx. 10 minute flash time or until dried to a matte finish mid-coat (or base coat), approx. 60 minutes.
  • Use air flow or heat (175 Deg F or less) to assist flashing between coats
  • Re-coat paint after approximately 30 minutes drying time
  • Dry to sand after approximately 60 minutes for best shaving. Dry sand only.
  • Use of heat reduces dry times. Do not exceed 175 Deg F
  • Dry sand with 800 – 1000 grit paper
  • Sanding is not required prior to application of paint or top-coat clear
  • Dry Sand Only. Do not wet sand.

Additional information

Weight 0.1 kg


There are no reviews yet.

Be the first to review “6005 AutoBorne Sealer Orange – 240ml”