BV200H-D Airbrush Spray Booth

BV200H-D Airbrush Spray Booth

This unit is currently on a 3-4 weeks lead time. If your requirement is urgent please call 01423 522 836 or email us.

Use code 150BV200H-D and get £150 off.

£1,001.70 inc vat

£834.75 exc vat

SKU: BV200H-D
Brands:
Brands
Clear
  • Description
  • Additional information
  • Reviews (0)

Description

Art No: BV200H-D – Hood Mounted Airbrushing Spray Booth Extraction Unit with Flexi-Duct

Air extraction hood and airbrushing spray booth that captures, filters and expels toxic fumes and dust for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling and more….

BenchVent Airbrushing Spray Booth applications:

This Airbrushing Spray Booth will 99% of toxic fumes and dust from:

  • Aerosol adhesives (glue booth for Spray Mount)
  • Aerosol lacquers and fixatives
  • Airbrush paint sprays applied to artwork

It can accommodate artwork of up to A1 size. For artwork applications, standard A1 or A2 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient over-spray capture.  The workstation hood also accommodates prototypes, 3D models, ceramic parts, PCB’s etc. The can be placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.  The Flexi-duct(s) can be fixed to a standard domestic vent(s) or simply placed through a partially open window to facilitate portability or convenience.

Description:

Steel construction finished in dove grey – fan/filter unit mounted onto hood enclosure – particulate filter – centrifugal blower external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter. Flexi-duct(s) 2 metres x 100mm dia. (BV100H-D has 2 ducts).
Operation All Graphic Air filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

Specification:

Dimensions: 680x525x450mm wxhxd

Model No: Fan Motor Spec Air Volume@ Free Air Ave. Air Velocity @ Filter Face Ave. Velocity @ Hood Face Noise Level LAeq dB(A)
BV200H-D   230V 50Hz 105W 355 m3/hr   0.6 m/sec  0.25 m/sec   58dB(A)

* 110 Volts 50 or 60Hz available if required.

Filtration:
The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.

These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct(s).

Check out the rest of our airbrushing spray booths for units with higher specifications. Please contact us for advice on the choice of machine for any given situation.

 

Air extraction hood and spray booth  

Captures, filters and expels for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling and more….


 

Applications include filtration of:  

Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.

The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.

A200H-D and A100H-D  

Extraction cabinets (All odours and gases are extracted to atmosphere)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Additional information

Weight 30 kg
Dimensions 10.2 x 69 x 71 cm
Voltage

210V, 110V

Reviews

There are no reviews yet.


Be the first to review “BV200H-D Airbrush Spray Booth”