Pure 250 – Nail Dust Filtration and Fume Extraction System

£830.63 inc vat

 

 

 

SKU: PURE250

Optional Filters

View basket

Buyers outside of the UK are responsible for any VAT, tariff, duty, taxes, handling fees, customs clearance charges, and other fees required by their country for importing consumer goods.

Description

Part No: PURE250 – Pure 250 – Nail Dust Filtration & Fume Extraction System with Dual Arm

If your salon does not have adequate ventilation, your employees and customers could be susceptible to various ailments associated with the fumes and nail dust created daily within a salon environment. The Pure 250 Nail Dust Filtration and Fume Extraction System from Bofa is specially designed to extract and remove these harmful fumes and dust. Can be used as a set up for 2 workers with ease and set up is fast and simple allowing the unit to be moved as and when required. The unit is low noise meaning it won’t disturb you when working with clients.

How does the Pure 250 Nail Dust Filtration and Fume Extraction System work?

Many systems currently available on the market are simply elaborate fans or air purifiers and do not extract fumes to the levels required by law. Bofas Pure Beauty system, on the other hand, achieves a high level of extraction by using 2 levels of filtration. Its first level of filtration is a HEPA filter that traps fine dust particles. It is followed by the activated carbon filter that adsorbs vapours within the carbon granules. The process ensures that fumes and dust are safely contained.

*BOFA uses mini pleat design HEPA (high-efficiency particulate air) filters tested and certified to a minimum efficiency of 99.995% down to 0.3 microns and 95% as small as 0.1 microns. They incorporate a series of webbing between the pleated media. This feature not only has even spacing for full filter coverage between each pleat but also helps to alleviate the possibility of airflow vibration or collapse.

*Activated Carbon Filter helps to capture and filter potentially hazardous and toxic fumes. Contaminated air must remain in contact with the carbon bed for a period of time sufficient to help ensure that no contaminants or odours are emitted (‘dwell time’). Our filters have been developed to help capture contaminants and odours, helping to eliminate the risk of bypass and/or tunnelling.

Key Features of the Pure 250 Nail Dust and Salon Extraction Unit

The Pure 250 extraction system will fit easily into any salon, without the costly need to replace existing nail stations or furniture.

  • Portable and Adaptable
  • Available in Black or White
  • Easy to Install and Easy to Use
  • Removes Toxic Fumes and Dust
  • No need to replace existing Salon Furniture
  • Adheres to regulatory Health and Safety Standards

This unit includes:

  • Pre filter
  • Activated carbon gas filter
  • 50mm stay put extraction arm
  • Installation flex
  • Table brackets
  • Filter blocked indicator
  • 20 sec overrun safety feature

Why is the Pure 250 the right choice for your salon?

Due to the chemicals they contain, many of the products used daily in Beauty Salons may be potentially harmful to the health of employees and customers alike, as well as damaging to the environment. In some areas, it is now mandatory that an salon extraction system is installed if you are using or are in contact with hazardous substances such as hardeners, drying agents, curing agents, MMA (Methyl Methacrylate) and Nail Dust as well as other solvent based products. MMA is considered the most hazardous in general with long term exposure to MMA can cause damage to the respiratory system and the liver.

What does the law say?

HSE (Health & Safety Executive) recommends that a salon should have good standard of ventilation (SR13) and suggests the use of extractor hood or downdraught table. It also clearly states that dust masks are not acceptable as a control (according to the COSHH Essentials SR13 guide on nail bars). Yet in approximately a half of the salons inspected by HSE, employees only wore a disposable dust mask as protection when carrying out nail services.

In some areas, it is now mandatory to install salon extraction system if people are regularly exposed to hazardous substances such as hardeners, drying agents, curing agents, MMA (Methyl Methacrylate) and nail dust as well as other solvent based products. It is also worth noting that long term exposure to MMA can cause damage to the respiratory system and the liver.

For further information on this nail desk just email us or call us on (0) 1423 522 836

Air extraction hood and spray booth  

Captures, filters and expels for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling and more….

 

 

Applications include filtration of:  

Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.

The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.

A200H-D and A100H-D  

Extraction cabinets (All odours and gases are extracted to atmosphere)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Additional information

Weight 30 kg
Colour

White, Black

Reviews

There are no reviews yet.


Be the first to review “Pure 250 – Nail Dust Filtration and Fume Extraction System”