Unit 1 Levens Hall Park,
Lund Lane, Killinghall,
Harrogate, HG3 2BG
BenchVent BV100H Airbrush Spray Booth
£960.75 exc vat
This unit is made to order & is on a 2 – 3 weeks delivery lead time. For quicker lead time check out the BV260S
Available on 0% interest finance. See monthly cost below.
- Additional information
- Reviews (0)
Art No: BV100H – Hood Mounted Hobby Spray Booth Filtration Cabinet
BV100H Airbrush Spray Booth captures, contains and filters for a cleaner, healthier working environment within art, graphics, design technology areas, crafts and modelling.
Applications include filtration of:
Aerosol adhesives (glue booth for Spray Mount), aerosol lacquers and fixatives and airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.
The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
BV100H Airbrush Spray Booth Specification:
Dimensions: 960x660x620mm hxwxd
|Model No:||Fan Motor Spec||Air Volume@ Free Air||Ave. Air Velocity @ Filter Face||Ave. Velocity @ Hood Face||Noise Level LAeq dB(A)|
|BV100H||230V 50Hz 105W||650 m3/hr||0.5 m/sec||0.25 m/sec||62dB(A)|
* 110 Volts 50 or 60Hz available if required.
GraphicAir Filtration Cabinets
Steel construction finished in dove grey – fan filter unit mounted onto hood enclosure – particulate filter
– carbon impregnated fibre filter – 2 x axial fan(s), external rotor motor type brushless, UL, VDE and CSA approved – sealed electrical wiring and switch, downstream of filters.
All Graphic Air filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
For artwork applications, standard A1 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture.
3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning,
The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours.
Through the process of filtration, adsorption and dilution, operator exposure to concentrations of potentially hazardous substances is vastly reduced.
These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants. They are not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas.
See BenchVent extraction cabinets BV200H-D and BV100H-D for total solvent odour and gas extraction.
NOTE: These units are recirculatory; i.e. filtered air is exhausted back into the workplace.
Please contact us for advice on the choice of machine for any given situation.