BenchVent BV300S-D Airbrush Spray Booth

SAVE £146.66 off RRP

BenchVent BV300S-D Airbrush Spray Booth

Our bestselling fume extraction booth!
It filters and removes fumes and vapours from:

  • Aerosol paints
  • Lacquers
  • Adhesives (glue booth for Spray Mount)
  • Airbrush over-spray

This unit is made to order & is on a 3 – 4 weeks delivery lead time

£427.50£280.84 inc vat

£234.03 exc vat

SKU: BV300S-D
Brands:
Brands
Clear
  • Description
  • Additional information
  • Reviews (0)

Description

Art No: BV300S-D – BenchVent BV300S-D Airbrush Spray Booth

This unit is made to order & is on a 3 – 4 weeks delivery lead time

“The best £280 I’ve ever spent” & “it’s the most important item in my workshop ”. – International Modeller

This bench top airbrush spray booth filters and extracts fumes and vapours from aerosol paints, lacquers, adhesives (glue booth for Spray Mount) and airbrush over-spray. It extracts solder fume, general solvent vapours and gases to the atmosphere, and filters grinding dusts, general particulates and powders etc. BV300S-D is a vital equipment for hobbyists, modellers and arts and craft enthusiasts to avoid the health hazards posed by fumes and dusts.

Airbrush Spray Booth applications include filtration and removal of:

  • Aerosol paints
  • Lacquers
  • Adhesives (glue booth for Spray Mount)
  • Airbrush over-spray
  • Solder fume
  • General solvent vapours and gases
  • Grinding dusts
  • General particulates
  • Powders
  • and more…

Dimensions and Features:

  • External dimensions (W x H x D): 565 x 390 x 430
  • Steel construction finished in dove grey
  • Plastic replaceable spray/fume shield
  • Particulate filter
  • Centrifugal blower
  • External rotor
  • Brushless motor type
  • UL, VDE and CSA approved
  • Sealed electrical wiring and switch
  • Downstream of filter
  • Flexi-duct 2 metres x 100 mm dia
  • Carry handle

Download BV300S-D Datasheet

Operation

 

All BenchVent filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This unit can be used in two positions.

Horizontal position – for Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.
Vertical position – For model sprays and airbrush use – light grinding particles (not sparking) – solder fume extraction and general solvent and gas extraction.

Filtration

The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposure to potentially hazardous substances.

Specification

Model
No.
Fan Motor  *
Spec.
Air Volume
at Free Air
Ave. Air Velocity
at Filter Face
Ave. Air Velocity
at Hood Face
Noise Level
LAeq dB(A)
A300S-D 230V 50Hz 105W 355 m3/hr 0.60m/sec 0.55m/sec 58

 

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.

 

Additional information

Weight 11.5 kg
Dimensions 68 x 52 x 28 cm
Voltage Option

240V, 110V

Reviews

There are no reviews yet.


Be the first to review “BenchVent BV300S-D Airbrush Spray Booth”

You may also like…